Qingdao Huashida Machinery Co., Ltd.
Pipeline Anticorrosion Thermal insulation Pipe production lineMACHINERY MANUFACTURER
Add to Cart
Plastic Extrusion Line for PP/HDPE Sheet Making China Manufacturer
It consists of SBJZ-series plate &sheet special-purpose single screw extruder SJZ-series conical twin screw extruder Or SJ-series parallel twin screw extruder; Equipped with auxiliary downstream accessories and moulds, it can produce: PE, and other board & sheet.
The machinery unit consists of extruder, Screen changing device, melt pump, T-die, 3-rollr or multiple-roller calender, cooling device, edge cutter, Haul-off system, plate cutter winder, electrical control system.
Others, The working principle is the 3 states of the hot-plastics at different temperatures: The pushing force of the screw change the physical stat from glass state to high elastic state, then glutinous-and-fluid sate, it comes out from the slim gap of the die, the rest of the procedures are calendar, cooling-shaper, edge-cutter, Haul-off, cutter, winder.
| (Modle) | (width) | Thickness(MM) | Seedtm/min) | Outputr(kg/h) |
| SBJZ-800 | 650 | 0.18-1.5 | 1-25 | 80-320 |
| SBJZ -1000 | 800 | 0.2-2.0 | 1-20 | 150-430 |
| SBJZ -1500 | 1350 | 1-10 | 0.5-10 | 150-450 |
| SBJZ -2000 | 1850 | 2-15 | 0.5-8 | 300-550 |
| SBJZ -2200 | 2000 | 1-10 | 0.4-3 | 420-820 |
| SBJZ -3000 | 2850 | 2-8 | 0.2-3 | 500-1200 |
| SBJZ -7000 | 6800 | 2-6 | 0.2-2 | 600-1560 |
At present, the prevailing heat shrink belt production line in the market is produced by Qingdao Huashida Machinery Co., LTD. Because Huashida has advanced technology, mature experience, reasonable formula, and a supporting industrial chain up and down - both to do thermal shrink belt production line, but also to produce thermal shrink belt, but also to sell raw materials, so that Huashida's thermal shrink belt production line is used by everyone is really not a false head.
Heat shrink belt production line advanced production technology, simple process, improve production efficiency, reduce costs, scientific and reasonable design, in line with the production of high-quality heat shrink belt market needs, has become a high market share of the equipment, but also the majority of customers preferred production line equipment. The process of producing heat shrink belts is to produce plastic sheets, which are stretched and coated with glue after radiation cross-linking.
PC/PP hollow cross-section plate. PVC transparent soft & hard plat & sheet. PVC foamed plate, PMMA/ABS co-extrusion bathing plate, inside chamber plate of the refrigerator and other multiple-layer composite co-extrusion plate & sheet size: Width: 300MM-700MM thickness0.2MM-45MM: Output rate: 80-1800KG. /H. The machinery unit is the best solution for plate & sheet production.
HDPE SHEET EXTRUDER
PLC CONTROL SYSTEM
HDPE sheet can
product application
The three-layer reinforced fiber type heat shrink belt (sleeve) is in a layer of substrate, a layer of adhesive sandwicated between a layer of reinforced fiber, greater bonding strength and higher tensile strength, faster shrinkage, and better effect. Mainly used for oil and gas pipeline joint repair corrosion, repair damage, can also be used for pipeline damage repair. This product is suitable for 3PE steel pipe, 2PE steel pipe, epoxy powder coating, insulation pipe jacket and polyethylene drainage and sewage pipe pipe repair, repair wound.
Qingdao Huashida specializes in the production of radiation crosslinked polyethylene heat shrinkable belt (sleeve), mainly composed of substrate and hot melt adhesive. The company adopts a unique hot melt adhesive formula to ensure the adhesion of the product in use to ensure the construction quality. The optimized design of the new heat shrink belt (sleeve) is easy to field construction, fast shrinkage, short operation time, low construction cost, with excellent water vapor permeability, chemical corrosion resistance, insulation and aging resistance and other properties, is the ideal material for pipeline anti-corrosion insulation system
